Wardrobe Bracket





Wardrobe Bracket
• Material.
Made from sand-cast bronze, this wardrobe bracket is crafted with care to provide exceptional strength and durability.
• Design.
Specifically designed to hold a 25mm diameter rail, making it ideal for walk-in wardrobes, cloakrooms, and open-plan storage solutions.
• Style advice from Mark.
Use this bracket to create a beautifully simple walk-in wardrobe — combining open rail-and-shelf storage to transform even the smallest box room or large cupboard into an amazing use of space. The raw bronze adds warmth and weight, making your storage feel like a permanent, considered part of the architecture.
• Installation.
This bracket is designed to work as part of our full wardrobe fitting system.
1. Wall-to-wall setup (alcoves, walk-in wardrobes).
For a rail running between two walls, install wardrobe brackets every 60cm along the run. When brackets are installed at 60cm intervals, it is essential to use Wardrobe Rail End Sockets on both ends for even weight distribution.
2. Open-ended setup (projecting rail with no wall at either end).
Where a rail does not run between two walls and is only supported by brackets on a single wall, install wardrobe brackets every 40cm or 50cm along the run, but please take guidance from your installer. Depending on the strength and construction of your wall, you may need additional brackets to ensure adequate support. We always advise using Wardrobe Rail End Sockets wherever possible.
Installation by a skilled installer. Supplied with brass screws.
• Craftsmanship.
Carefully hand-cast in a British foundry.
Dimensions & Fit
Works with: 25mm diameter rail
Dimensions in cm: Height 33.5cm, Bracket Projection 31.5cm, Projection from wall to centre of wardrobe rail 29.6cm
Dimensions in inches: Height 13.2", Bracket Projection 12.4", Projection from wall to centre of wardrobe rail 11.7"
Shipping
We ship worldwide, including the USA.
Dispatched within 3 working days via UPS.
Use Case
Ideal for walk-in wardrobes, open hanging rails, and cloakroom setups.
Finish Notes
Raw, sand‑cast bronze left unlacquered to develop a natural patina over time. Each bracket will vary subtly in tone, adding character to your space.
We ship to the USA and worldwide
We aim to dispatch within 3 working days, subject to availability
Works with a 25mm diameter rail
Dimensions in cm – Height 33.5cm, bracket Projection 31.5cm, Projection from wall to centre of wardrobe rail 29.6cm
Dimensions in inches – Height 13.2", bracket Projection 12.4", Projection from wall to centre of wardrobe rail 11.7"
Returns - We have a 28 day return policy. See our returns and shipping page for more information or contact shop@marklewisinteriordesign.com with any questions.
Office Hours - 10am to 4pm (GMT) Monday to Friday
Price shown is for a single Wardrobe Bracket
Solid brass screws are included